Javascript Disabled Detected

You currently have javascript disabled. Several functions may not work. Please re-enable javascript to access full functionality.

Allumage Electronique A Cartographie En Diy

Débuté par sarahconnors, août 25 2015 18:23

ECU ARDUINO

Please log in to reply

1298 réponses à ce sujet

#1261 Reno1303

Pilote

Membres
307 messages

Localisation:Melun (77)

Posté 23 janvier 2017 - 10:08

comme vous avez l'air d'en connaitre beaucoup plus que moi en arduino les 2 lignes qu'on trouve dans map sa représente bien abscisse et ordonné de la carto?

byte pressure_axis[nombre_point_DEP] =

{ 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100};

int rpm_axis[nombre_point_RPM] =

{600, 800, 1000, 1200, 1500, 1800, 2100, 2400, 2700, 3000, 3300, 3600, 3900, 4200, 4500, 4800, 5100, 5400, 5700, 6000, 6500, 7000, 7500}; // 23

Oui, ce sont les abscisses et ordonnées des cartos.

Retour en haut

#1262 Jujubx

Apprenti Pilote

Membres
115 messages

Localisation:auxerre 89

Posté 30 janvier 2017 - 20:08

ok du coup sa marche nettement mieux!

Retour en haut

#1263 Jujubx

Apprenti Pilote

Membres
115 messages

Localisation:auxerre 89

Posté 01 février 2017 - 12:28

L indice Gve sa correspond a quoi dans les log?

Retour en haut

#1264 Jujubx

Apprenti Pilote

Membres
115 messages

Localisation:auxerre 89

Posté 05 février 2017 - 15:03

bonjour,

alors la aujourd'hui gros soucis: si quelqu'un peu m'aider! sachant que j'utilise 2 pc différent c'est peut etre l'origine du probleme?

Arduino : 1.8.1 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\julien\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\julien\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\julien\Documents\Arduino\libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -ide-version=10801 -build-path C:\Users\julien\AppData\Local\Temp\arduino_build_980906 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avrdude.path=C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino8 -prefs=runtime.tools.avr-gcc.path=C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.3-arduino2 -prefs=runtime.tools.arduinoOTA.path=C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.0.0 -verbose H:\combiduino\combiduino.ino

C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\julien\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\julien\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\julien\Documents\Arduino\libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -ide-version=10801 -build-path C:\Users\julien\AppData\Local\Temp\arduino_build_980906 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avrdude.path=C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino8 -prefs=runtime.tools.avr-gcc.path=C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.3-arduino2 -prefs=runtime.tools.arduinoOTA.path=C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.0.0 -verbose H:\combiduino\combiduino.ino

Using board 'mega' from platform in folder: C:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17

Using core 'arduino' from platform in folder: C:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17

Detecting libraries used...

"C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10801 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\cores\arduino" "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\variants\mega" "C:\Users\julien\AppData\Local\Temp\arduino_build_980906\sketch\combiduino.ino.cpp" -o "nul"

"C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10801 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\cores\arduino" "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\variants\mega" "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\libraries\EEPROM\src" "C:\Users\julien\AppData\Local\Temp\arduino_build_980906\sketch\combiduino.ino.cpp" -o "nul"

Generating function prototypes...

"C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10801 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\cores\arduino" "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\variants\mega" "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\libraries\EEPROM\src" "C:\Users\julien\AppData\Local\Temp\arduino_build_980906\sketch\combiduino.ino.cpp" -o "C:\Users\julien\AppData\Local\Temp\arduino_build_980906\preproc\ctags_target_for_gcc_minus_e.cpp"

"C:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\julien\AppData\Local\Temp\arduino_build_980906\preproc\ctags_target_for_gcc_minus_e.cpp"

Compilation du croquis...

"C:\Users\julien\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10801 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\cores\arduino" "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\variants\mega" "-IC:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\libraries\EEPROM\src" "C:\Users\julien\AppData\Local\Temp\arduino_build_980906\sketch\combiduino.ino.cpp" -o "C:\Users\julien\AppData\Local\Temp\arduino_build_980906\sketch\combiduino.ino.cpp.o"

H:\combiduino\combiduino.ino: In function 'void setup()':

combiduino:162: error: 'debug' was not declared in this scope

debug ("Init des MAP EEPROM");init_de_eeprom();RAZknock(); } // on charge les map EEPROM a partir de la RAM et konco moyen

combiduino:162: error: 'init_de_eeprom' was not declared in this scope

debug ("Init des MAP EEPROM");init_de_eeprom();RAZknock(); } // on charge les map EEPROM a partir de la RAM et konco moyen

combiduino:164: error: 'debug' was not declared in this scope

debug ("Init des MAP RAM");

combiduino:165: error: 'read_eeprom' was not declared in this scope

read_eeprom(); // on charge les MAP en RAM a partir de l'eeprom et la derniÃƒÂ¨re MAP utilisÃƒÂ©e

combiduino:179: error: 'pip_interupt' was not declared in this scope

attachInterrupt(1, pip_interupt, FALLING); // interruption PIP signal de l'edis

combiduino:181: error: 'injection_initiale' was not declared in this scope

injection_initiale();

H:\combiduino\combiduino.ino: In function 'void loop()':

combiduino:205: error: 'checkdesordres' was not declared in this scope

if (time_loop - time_reception > interval_time_reception){checkdesordres();time_reception = time_loop;}

combiduino:209: error: 'deb' was not declared in this scope

if (BIT_CHECK(running_option,BIT_NEW_VALUE)) {deb();calcul_carto();cbi(running_option,BIT_NEW_VALUE); fin("clc");}

combiduino:209: error: 'calcul_carto' was not declared in this scope

if (BIT_CHECK(running_option,BIT_NEW_VALUE)) {deb();calcul_carto();cbi(running_option,BIT_NEW_VALUE); fin("clc");}

combiduino:209: error: 'fin' was not declared in this scope

if (BIT_CHECK(running_option,BIT_NEW_VALUE)) {deb();calcul_carto();cbi(running_option,BIT_NEW_VALUE); fin("clc");}

combiduino:213: error: 'deb' was not declared in this scope

if (time_loop - time_check_depression > interval_time_check_depression){deb();gestiondepression();time_check_depression = time_loop;fin("dep");}

combiduino:213: error: 'gestiondepression' was not declared in this scope

if (time_loop - time_check_depression > interval_time_check_depression){deb();gestiondepression();time_check_depression = time_loop;fin("dep");}

combiduino:213: error: 'fin' was not declared in this scope

if (time_loop - time_check_depression > interval_time_check_depression){deb();gestiondepression();time_check_depression = time_loop;fin("dep");}

combiduino:215: error: 'deb' was not declared in this scope

if (time_loop - time_check_TPS > interval_time_check_TPS){deb();gestionTPS();time_check_TPS = time_loop;fin("tps");}

combiduino:215: error: 'gestionTPS' was not declared in this scope

if (time_loop - time_check_TPS > interval_time_check_TPS){deb();gestionTPS();time_check_TPS = time_loop;fin("tps");}

combiduino:215: error: 'fin' was not declared in this scope

if (time_loop - time_check_TPS > interval_time_check_TPS){deb();gestionTPS();time_check_TPS = time_loop;fin("tps");}

combiduino:218: error: 'deb' was not declared in this scope

if (time_loop - time_check_CLT > interval_time_check_CLT){deb();gestionCLT();time_check_CLT = time_loop;fin("clt");}

combiduino:218: error: 'gestionCLT' was not declared in this scope

if (time_loop - time_check_CLT > interval_time_check_CLT){deb();gestionCLT();time_check_CLT = time_loop;fin("clt");}

combiduino:218: error: 'fin' was not declared in this scope

if (time_loop - time_check_CLT > interval_time_check_CLT){deb();gestionCLT();time_check_CLT = time_loop;fin("clt");}

combiduino:221: error: 'deb' was not declared in this scope

if (time_loop - time_check_lambda > interval_time_check_lambda){deb();lecturelambda();time_check_lambda = time_loop;fin("lbd");}

combiduino:221: error: 'lecturelambda' was not declared in this scope

if (time_loop - time_check_lambda > interval_time_check_lambda){deb();lecturelambda();time_check_lambda = time_loop;fin("lbd");}

combiduino:221: error: 'fin' was not declared in this scope

if (time_loop - time_check_lambda > interval_time_check_lambda){deb();lecturelambda();time_check_lambda = time_loop;fin("lbd");}

combiduino:224: error: 'deb' was not declared in this scope

if (time_loop - time_check_AFR > interval_time_check_AFR){deb();AFR_self_learning();time_check_AFR = time_loop;fin("afr");}

combiduino:224: error: 'AFR_self_learning' was not declared in this scope

if (time_loop - time_check_AFR > interval_time_check_AFR){deb();AFR_self_learning();time_check_AFR = time_loop;fin("afr");}

combiduino:224: error: 'fin' was not declared in this scope

if (time_loop - time_check_AFR > interval_time_check_AFR){deb();AFR_self_learning();time_check_AFR = time_loop;fin("afr");}

combiduino:227: error: 'deb' was not declared in this scope

if (time_loop - time_envoi > interval_time_envoi){deb();gestionsortieECU();gestionsortieEC1();time_envoi = time_loop;fin("bt1");}

combiduino:227: error: 'gestionsortieECU' was not declared in this scope

if (time_loop - time_envoi > interval_time_envoi){deb();gestionsortieECU();gestionsortieEC1();time_envoi = time_loop;fin("bt1");}

combiduino:227: error: 'gestionsortieEC1' was not declared in this scope

if (time_loop - time_envoi > interval_time_envoi){deb();gestionsortieECU();gestionsortieEC1();time_envoi = time_loop;fin("bt1");}

combiduino:227: error: 'fin' was not declared in this scope

if (time_loop - time_envoi > interval_time_envoi){deb();gestionsortieECU();gestionsortieEC1();time_envoi = time_loop;fin("bt1");}

combiduino:230: error: 'deb' was not declared in this scope

if (time_loop - time_check_connect > interval_time_check_connect){deb();checkBLE();time_check_connect = time_loop;fin("bt2");}

combiduino:230: error: 'fin' was not declared in this scope

if (time_loop - time_check_connect > interval_time_check_connect){deb();checkBLE();time_check_connect = time_loop;fin("bt2");}

combiduino:233: error: 'deb' was not declared in this scope

if (time_loop - time_check_fuel_pump > interval_time_check_fuel_pump){deb();checkpump();time_check_fuel_pump = time_loop;fin("pmp");}

combiduino:233: error: 'checkpump' was not declared in this scope

if (time_loop - time_check_fuel_pump > interval_time_check_fuel_pump){deb();checkpump();time_check_fuel_pump = time_loop;fin("pmp");}

combiduino:233: error: 'fin' was not declared in this scope

if (time_loop - time_check_fuel_pump > interval_time_check_fuel_pump){deb();checkpump();time_check_fuel_pump = time_loop;fin("pmp");}

combiduino:236: error: 'deb' was not declared in this scope

if (time_loop - time_megalog > interval_time_megalog){deb();Megalog();time_megalog = time_loop;fin("log");}

combiduino:236: error: 'fin' was not declared in this scope

if (time_loop - time_megalog > interval_time_megalog){deb();Megalog();time_megalog = time_loop;fin("log");}

H:\combiduino\combiduino.ino: In function 'void initlog()':

combiduino:282: error: 'sndlog' was not declared in this scope

sndlog("Time;CLT;IAE;mSpark;RPM;Load;MAPdot;PhAccel;PWacc;PW;Gve;AFR;Gego;SparkAdv;TPS;TPSdot;idle;carto;PIDadv;Dec;PW_corr;Qteparoi;Xadher;Tau" );

H:\combiduino\combiduino.ino: In function 'void Megalog()':

combiduino:316: error: 'sndlog' was not declared in this scope

sndlog(logsend);

H:\combiduino\MAP.ino: At global scope:

MAP:57: error: expected primary-expression before ';' token

;

MAP:57: error: expected '}' before ';' token

MAP:57: error: too many initializers for 'byte [17][23] {aka unsigned char [17][23]}'

H:\combiduino\eeprom.ino: In function 'void writecarto_eeprom_ram(int)':

eeprom:73: error: 'read_eeprom_point_KPA' was not declared in this scope

pressure_axis[nr_ligne] = read_eeprom_point_KPA (carto_eeprom , nr_ligne );

eeprom:78: error: 'read_eeprom_point_RPM' was not declared in this scope

rpm_axis[nr_RPM] = read_eeprom_point_RPM (carto_eeprom , nr_RPM );

eeprom:84: error: 'read_eeprom_point_carto' was not declared in this scope

ignition_map [nr_ligne] [nr_RPM] = read_eeprom_point_carto (carto_eeprom , nr_ligne , nr_RPM );

H:\combiduino\eeprom.ino: In function 'void write_eeprom_point_RPM(int, int, int)':

eeprom:131: error: 'EEPROMWriteInt' was not declared in this scope

EEPROMWriteInt(adresse , value );

H:\combiduino\eeprom.ino: In function 'int read_eeprom_point_RPM(int, int)':

eeprom:137: error: 'EEPROMReadInt' was not declared in this scope

return EEPROMReadInt(adresse);

H:\combiduino\eeprom.ino: In function 'void init_de_eeprom()':

eeprom:181: error: 'EEPROMWriteInt' was not declared in this scope

EEPROMWriteInt(eprom_rev_max, rev_limit); // rev max par defaut

H:\combiduino\eeprom.ino: In function 'void read_eeprom()':

eeprom:204: error: 'debug' was not declared in this scope

debug ("Read EEPROM carto nr " + String(carto_actuel));

eeprom:268: error: 'EEPROMReadInt' was not declared in this scope

rev_limit = EEPROMReadInt(eprom_rev_max);

eeprom:270: error: 'EEPROMWriteInt' was not declared in this scope

EEPROMWriteInt(eprom_rev_max, 7500); // rev max par defaut

eeprom:276: error: 'EEPROMWriteInt' was not declared in this scope

EEPROMWriteInt(eprom_rev_min, 500); // rev min par defaut

eeprom:282: error: 'EEPROMWriteInt' was not declared in this scope

EEPROMWriteInt(eprom_avance, 25); // rev min par defaut

H:\combiduino\gestionECU.ino: In function 'void calcul_carto()':

gestionECU:8: error: 'calculRPM' was not declared in this scope

calculRPM();

gestionECU:57: error: 'decode_rpm' was not declared in this scope

point_RPM = decode_rpm(engine_rpm_average); // retrouve index RPM

gestionECU:58: error: 'decode_pressure' was not declared in this scope

point_KPA = decode_pressure(map_pressure_kpa); // retrouve index pression

gestionECU:59: error: 'calculinterpolation' was not declared in this scope

calculinterpolation(engine_rpm_average, map_pressure_kpa); // calcul pourcentage a appliquer par bin

gestionECU:60: error: 'calculdelavance' was not declared in this scope

calculdelavance();

gestionECU:61: error: 'calcul_injection' was not declared in this scope

calcul_injection();

H:\combiduino\gestionECU.ino: In function 'void calculdelavance()':

gestionECU:121: error: 'Idle_correction' was not declared in this scope

PID_idle_advance = Idle_correction();

gestionECU:122: error: 'IGN_MAP' was not declared in this scope

Degree_Avance_calcul = IGN_MAP() + correction_degre + PID_idle_advance ;

H:\combiduino\gestionECU.ino: In function 'void pip_interupt()':

gestionECU:240: error: 'Calcul_qte_paroi' was not declared in this scope

Calcul_qte_paroi();

H:\combiduino\injection.ino: In function 'void calcul_injection()':

injection:12: error: 'MAP_ACCEL' was not declared in this scope

PW_accel_actuel_us = MAP_ACCEL(TPS_accel);

injection:18: error: 'correction_lambda' was not declared in this scope

correction_lambda_actuel = correction_lambda();

injection:19: error: 'VE_MAP' was not declared in this scope

VE_actuel = VE_MAP();

injection:20: error: 'WAS' was not declared in this scope

int WAS_actuel = WAS();

injection:21: error: 'IAE' was not declared in this scope

IAE_actuel = IAE();

injection:22: error: 'Decel' was not declared in this scope

DEC_actuel = Decel();

injection:36: error: 'Calcul_PW_actuel_corrige_XTAU' was not declared in this scope

Calcul_PW_actuel_corrige_XTAU();

H:\combiduino\injection.ino: In function 'void Calcul_PW_actuel_corrige_XTAU()':

injection:322: error: 'Calcul_variable_XTAU' was not declared in this scope

Calcul_variable_XTAU();

H:\combiduino\inputOutput.ino: In function 'void checkdesordres()':

inputOutput:13: error: 'debug' was not declared in this scope

debug("Fixed Advance Selected");

inputOutput:17: error: 'debug' was not declared in this scope

debug("Ignition Advance Selected");

inputOutput:21: error: 'debug' was not declared in this scope

debug("debug ON");

inputOutput:25: error: 'debug' was not declared in this scope

debug("debug OFF");

inputOutput:30: error: 'debug' was not declared in this scope

debug("Multispark Enabled");

inputOutput:35: error: 'debug' was not declared in this scope

debug("Multispark Disabled");

inputOutput:52: error: 'changement_carto' was not declared in this scope

changement_carto(); // REVU

inputOutput:59: error: 'changement_point_carto' was not declared in this scope

changement_point_carto(); // REVU

inputOutput:63: error: 'send_carto_iphone' was not declared in this scope

send_carto_iphone(); // REVU

inputOutput:67: error: 'send_kpa_iphone' was not declared in this scope

send_kpa_iphone(); // REVU

inputOutput:73: error: 'get_kpa_iphone' was not declared in this scope

get_kpa_iphone(); // REVU

inputOutput:77: error: 'send_rpm_iphone' was not declared in this scope

send_rpm_iphone(); // REVU

inputOutput:83: error: 'get_rpm_iphone' was not declared in this scope

get_rpm_iphone(); // REVU

inputOutput:91: error: 'send_setting1_iphone' was not declared in this scope

send_setting1_iphone();

inputOutput:99: error: 'send_setting1_ecu' was not declared in this scope

send_setting1_ecu();

inputOutput:104: error: 'send_setting2_iphone' was not declared in this scope

send_setting2_iphone();

inputOutput:109: error: 'send_setting2_ecu' was not declared in this scope

send_setting2_ecu();

inputOutput:116: error: 'send_setting3_iphone' was not declared in this scope

send_setting3_iphone();

inputOutput:124: error: 'send_setting3_ecu' was not declared in this scope

send_setting3_ecu();

inputOutput:128: error: 'debug' was not declared in this scope

debug("init kpa ok");

inputOutput:132: error: 'debug' was not declared in this scope

debug("record knock");

inputOutput:136: error: 'debug' was not declared in this scope

debug("save knock");

inputOutput:142: error: 'debug' was not declared in this scope

debug("knock off");

inputOutput:148: error: 'debug' was not declared in this scope

debug("knock off");

inputOutput:152: error: 'debug' was not declared in this scope

debug("AFR ON");

inputOutput:156: error: 'debug' was not declared in this scope

debug("AFR OFF");

inputOutput:160: error: 'debug' was not declared in this scope

debug("plusreq");

inputOutput:164: error: 'debug' was not declared in this scope

debug("moinsreq");

inputOutput:168: error: 'debug' was not declared in this scope

debug("write ego");

inputOutput:171: error: 'printego_ram' was not declared in this scope

printego_ram();

inputOutput:172: error: 'debug' was not declared in this scope

debug("print ego");

inputOutput:176: error: 'debug' was not declared in this scope

debug("idle on");

inputOutput:180: error: 'debug' was not declared in this scope

debug("idle off");

H:\combiduino\inputOutput.ino: In function 'void send_setting1_ecu()':

inputOutput:204: error: 'getValue' was not declared in this scope

carto = getValue(inputString, ';', 1) ; // 1er parametre

inputOutput:224: error: 'EEPROMWriteInt' was not declared in this scope

EEPROMWriteInt(eprom_rev_min, rpmmin.toInt() ); // rev min

inputOutput:227: error: 'EEPROMWriteInt' was not declared in this scope

EEPROMWriteInt(eprom_rev_max, rpmmax.toInt() ); // rev max

H:\combiduino\inputOutput.ino: In function 'void send_setting2_ecu()':

inputOutput:235: error: 'getValue' was not declared in this scope

nameBT= getValue(inputString, ';', 1) + " ";

H:\combiduino\inputOutput.ino: In function 'void send_setting3_ecu()':

inputOutput:250: error: 'getValue' was not declared in this scope

ms = getValue(inputString, ';', 1) ; // 1er parametre

inputOutput:267: error: 'EEPROMWriteInt' was not declared in this scope

EEPROMWriteInt(eprom_avance, avance.toInt() ); // rev min

H:\combiduino\inputOutput.ino: In function 'void send_setting1_iphone()':

inputOutput:288: error: 'EEPROMReadInt' was not declared in this scope

OutputString = "gt1;" + String(EEPROM.read(eprom_carto_actuel)) + ";" + String(EEPROM.read(eprom_debug))+ ";" + String(EEPROMReadInt(eprom_rev_min)) + ";" + String(EEPROMReadInt(eprom_rev_max)) ;

H:\combiduino\inputOutput.ino: In function 'void send_setting3_iphone()':

inputOutput:302: error: 'EEPROMReadInt' was not declared in this scope

int av = EEPROMReadInt(eprom_avance);

H:\combiduino\inputOutput.ino: In function 'void changement_carto()':

inputOutput:315: error: 'getValue' was not declared in this scope

carto = getValue(inputString, ';', 1) ; // 1er parametre

inputOutput:320: error: 'debug' was not declared in this scope

debug("carto change" + carto);

inputOutput:322: error: 'debug' was not declared in this scope

debug("carto invalide" + carto);

H:\combiduino\inputOutput.ino: In function 'void send_carto_iphone()':

inputOutput:341: error: 'getValue' was not declared in this scope

cartoeeprom = getValue(inputString, ';', 1) ; // 2eme parametre

inputOutput:354: error: 'debug' was not declared in this scope

debug("ordre invalide");

H:\combiduino\inputOutput.ino: In function 'void send_kpa_iphone()':

inputOutput:367: error: 'getValue' was not declared in this scope

cartoeeprom = getValue(inputString, ';', 1) ; // 1eme parametre

inputOutput:378: error: 'debug' was not declared in this scope

debug("ordre invalide");

H:\combiduino\inputOutput.ino: In function 'void send_rpm_iphone()':

inputOutput:390: error: 'getValue' was not declared in this scope

cartoeeprom = getValue(inputString, ';', 1) ; // 1eme parametre

inputOutput:401: error: 'debug' was not declared in this scope

debug("ordre invalide");

H:\combiduino\inputOutput.ino: In function 'void get_kpa_iphone()':

inputOutput:418: error: 'getValue' was not declared in this scope

carto = getValue(inputString, ';', 1) ; // 1er parametre

H:\combiduino\inputOutput.ino: In function 'void get_rpm_iphone()':

inputOutput:437: error: 'getValue' was not declared in this scope

carto = getValue(inputString, ';', 1) ; // 1er parametre

H:\combiduino\inputOutput.ino: In function 'void changement_point_carto()':

inputOutput:456: error: 'getValue' was not declared in this scope

carto = getValue(inputString, ';', 1) ; // 1er parametre

inputOutput:464: error: 'debug' was not declared in this scope

debug("ordre invalid");

H:\combiduino\inputOutput.ino: In function 'void gestionsortieECU()':

inputOutput:477: error: expected ')' before string constant

debug("RPM :" +String()+ engine_rpm_average" MAP :" + String(map_pressure_kpa) + " DEG :"+ String(Degree_Avance_calcul) + " MAP_US :"+String(map_value_us) ) ;

inputOutput:477: error: 'debug' was not declared in this scope

debug("RPM :" +String()+ engine_rpm_average" MAP :" + String(map_pressure_kpa) + " DEG :"+ String(Degree_Avance_calcul) + " MAP_US :"+String(map_value_us) ) ;

H:\combiduino\inputOutput.ino: In function 'void printego_ram()':

inputOutput:528: error: 'sndlog' was not declared in this scope

sndlog(txt);

H:\combiduino\utilitaire.ino: In function 'void gestionTPS()':

utilitaire:145: error: 'gestionTPSMAPdot' was not declared in this scope

gestionTPSMAPdot();

Utilisation de la bibliothèque EEPROM version 2.0 dans le dossier: C:\Users\julien\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.17\libraries\EEPROM

exit status 1

'debug' was not declared in this scope

Retour en haut

#1265 Jaar

Apprenti Pilote

Membres
106 messages

Localisation:Val d'oise 95

Posté 07 février 2017 - 18:34

euuuuuuu

Je dirais desinstale le prog arduino et reinstalle tout avec les bibliothèques et tout

Et recommence.

Retour en haut

#1266 Jujubx

Apprenti Pilote

Membres
115 messages

Localisation:auxerre 89

Posté 09 février 2017 - 21:52

j'ai testé sa et tjrs rien! et comme j'avais une ancienne version du combiduino qui elle marchais j'ai remis tout les reglages et c'est bon.

Retour en haut

#1267 n2c_coxiste

Pilote

Membres
344 messages

Localisation:OYE PLAGE, France
Interets:VW, pourkoi?

Posté 24 février 2017 - 12:48

Hello,

j'ai investi dans une PORSCHE 914 1700 de 1971.

Son injection D-Jetronic étant défaillante, l'ancien proprio en périple aux USA avec (Montana) a fait remplacer toute l'injection par des HPMX44 (copie IDF de piètre qualité)

Se pose donc désormais la question d'un retour à l'injection, mais via celle du forum.

Un 1700cc type 4 a déjà été équipé ici?

Merci,

Greg.

Retour en haut

#1268 Jujubx

Apprenti Pilote

Membres
115 messages

Localisation:auxerre 89

Posté 24 février 2017 - 20:48

salut Greg,

le plus simple pour toi si tu as les pieces serai d'utiliser l'injection d jetronic.

soit la refaire fonctionner soit commander les injecteur par le combiduino.

Retour en haut

#1269 n2c_coxiste

Pilote

Membres
344 messages

Localisation:OYE PLAGE, France
Interets:VW, pourkoi?

Posté 25 février 2017 - 15:30

salut Greg,

le plus simple pour toi si tu as les pieces serai d'utiliser l'injection d jetronic.

soit la refaire fonctionner soit commander les injecteur par le combiduino.

je n'ai hélas aucune pièce de l'injection...

Retour en haut

#1270 Jujubx

Apprenti Pilote

Membres
115 messages

Localisation:auxerre 89

Posté 26 février 2017 - 14:40

ah ok! ducoup tu va avoir beaucoup plus de taff mais c'est pas impossible non plus.

Retour en haut

#1271 corrado s2

Apprenti Pilote

Membres
85 messages

Posté 26 février 2017 - 15:12

Si ça intéresse quelqu'un, jai ca à vendre.

Fichier(s) joint(s)

IMG_0030.JPG 119,08 Ko 16 Nombre de téléchargements

Retour en haut

#1272 Jaar

Apprenti Pilote

Membres
106 messages

Localisation:Val d'oise 95

Posté 03 juin 2017 - 09:10

Yop, ba il n'y a plus grand monde par ici !

Bon sinon petit retour d'utilisation. Bon j'ai pas encore fait de lonng trajet, mais je m'en sert assé regulierement pour aller au taff. Et ca marche tres bien !! Je suis jute en allumage moi. Voila quoi ! ca le fait !!! Bon dommage que l'appli iphone n'est pas vue le jour par contre.

a++

Retour en haut

#1273 ces

Pilote de base

Membres
5 messages

Posté 22 juin 2017 - 22:20

cc en effet , moi je regarde regulierement si y'a des news ..mais ..

en tous cas merci de ton retour ..

Modifié par ces, 22 juin 2017 - 22:21 .

Retour en haut

#1274 gawell56

Pilote de base

Membres
4 messages

Localisation:Perpignan

Posté 23 juin 2017 - 07:33

Bonjour à tous,

félicitation pour ce fils géniale ! Je vois qu'il n'y a plus grand monde mais je tante ma chance :

- Est il possible de piloter l'ouverture motorisée des papillons depuis un capteur qui bouge grâce au cable d'accélérateur ?

- j'ai un capteur PMH, sur le volant moteur, est ce que celui-ci peut remplacer la roue denté 36-1 ? Sachant que je n'ai pas compter mais je n'ai pas 36 dents ? Est ce possible en changeant le nombre de dents dans le programme ? Si oui où ?

merci

Retour en haut

#1275 scourtaud

Grosse bete ..

Membres
3 070 messages

Localisation:Geneve

Posté 23 juin 2017 - 08:19

Salut à tous,

J'ai un peu disparu ayant d'autres priorités (comme la vie l'impose souvent) mais l'été arrivant, je vais pouvoir finir ma voiture et donc l'application mobile.

Pour ce qui est de piloter les papillons c'est possible mais hormis pour un régulateur de vitesse ne ne voit pas bien l'utilité et dans ce cas, autant copier le systeme traditionnel qui est un petit moteur qui tire le cable d'accelerateur via une jonction.

Pour le capteur PMH, je doute que ca suffise, il faudrait faire beaucoup de calculs pas forcement assez précis pour savoir quand allumer.

Outil de boites de vitesses : Le sujet
Flat4find project - Cartographie aircooled : Le sujet

Ma voiture bien aimée : 1303 routière
Son moteur : Evolution 1776 Vers Xxxx
Sa restauration : http://www.old-dropp... 1303 Cabriolet

Retour en haut

Retourner dans Moteur Origine et Perfo

0 utilisateur(s) li(sen)t ce sujet

0 members, 0 guests, 0 anonymous users

Allumage Electronique A Cartographie En Diy

Fichier(s) joint(s)

0 utilisateur(s) li(sen)t ce sujet

Sign In